Industrial Flooring Contractor · San Antonio, TX
Industrial Epoxy Flooring in San Antonio
High-build epoxy floor systems for warehouses, manufacturing plants, distribution centres and food processing facilities. Engineered for forklift traffic, heavy machinery, chemical exposure and constant use.
Built to Handle
✓Forklift traffic
✓Heavy machinery
✓Chemical exposure
✓Impact & abrasion
✓Washdowns
✓Thermal shock
✓Slip hazards
✓Safety striping
Industrial Floors Face Different Demands
An industrial floor isn't just a surface. It's part of your operation. When it cracks, wears through or becomes unsafe, it slows production, damages equipment and puts workers at risk.
That's why industrial epoxy is specified differently from commercial flooring. Thicker high-build systems, harder topcoats and the right texture are matched to the specific stresses your floor faces every day.
Challenge 01
Forklift & Pallet Traffic
Constant wheel loads wear thin coatings down to bare concrete. High-build epoxy systems add thickness and abrasion resistance in traffic lanes.
Challenge 02
Heavy Machinery & Impact
Dropped tools, parts and equipment chip and crack weak floors. Impact-resistant systems absorb daily abuse without breaking down.
Challenge 03
Chemical Exposure
Oils, solvents, acids and cleaners attack unprotected concrete. We select coatings rated for the specific chemicals in your facility.
Challenge 04
Thermal Shock & Washdowns
Hot water, steam cleaning and temperature swings can crack standard epoxy. For these areas we recommend urethane cement flooring.
Challenge 05
Slip Resistance
Wet, oily or dusty floors cause accidents. Broadcast aggregates and textured topcoats give workers reliable footing.
Challenge 06
Downtime & Cure Times
Every hour offline costs production. We plan phased installations and select materials with cure times that fit your schedule.
Is Your Floor Holding Back Your Operation?
We'll assess your facility and recommend a system built for your traffic, chemicals and schedule.
Industrial Facilities We Serve
From distribution centres to food plants, we install industrial floor systems across San Antonio and South Texas.
Warehouses
Abrasion-resistant floors with marked aisles and racking zones.
Manufacturing Plants
Impact- and chemical-resistant systems around machinery and lines.
Distribution Centers
High-build coatings for heavy forklift and pallet-jack traffic.
Food Processing
Seamless, sanitary floors, with urethane cement for hot washdown areas.
Breweries
Floors that handle spills, sugars, cleaning chemicals and hot water.
Automotive Facilities
Service bays and shops resistant to oils, fluids and hot tyres.
Production Facilities
Durable, easy-to-clean floors with safety-coded work zones.
Maintenance Facilities
Tough floors for repair shops, fleet bays and equipment yards.
Industrial Floor Systems
Every system is specified around your loads, chemicals, temperatures and cleaning routine, not a one-size-fits-all coating.
Safety & Organization
Safety Striping & Line Marking
Clear floor markings keep people and equipment moving safely. We install durable epoxy striping as part of your floor system, so it lasts far longer than painted or taped lines.
✓Forklift lanes & aisles
✓Pedestrian walkways
✓Hazard & restricted zones
✓Racking & staging areas
✓Color-coded work zones
✓Loading dock markings
Food, Beverage & Sanitary Facilities
Floors Built for Sanitation
Facilities that operate under USDA or FDA oversight generally need floors that are smooth, durable, non-absorbent and easy to clean. Cracked concrete, failing coatings and grout lines can trap moisture and bacteria and lead to problems during inspections.
We install seamless resin systems designed for these environments and work with your quality or operations team so the floor supports your sanitation programme. Final requirements always depend on your facility and inspector.
Discuss Your Facility
Seamless Surface
No joints or grout lines to harbour bacteria.
Integral Cove Base
Curved floor-to-wall transitions that are easy to wash down.
Slip-Resistant Texture
Traction for wet production and washdown areas.
Hot Washdown Ready
Urethane cement for steam and thermal shock.
Planned Around Your Production Schedule
We know a floor project can't shut down your operation. Here's how we take an industrial project from first call to return-to-service.
01
Site Assessment & Moisture Testing
We inspect the slab, test for moisture, and review your traffic, chemicals and cleaning process.
02
Written Proposal & Specification
You receive a clear scope covering the system, thickness, striping and timeline.
03
Shutdown & Phasing Plan
Work is planned by zone, shift or shutdown window so production can continue where possible.
04
Prep, Repair & Installation
Mechanical surface prep, crack and joint repair, then the coating system and striping.
05
Inspection & Return to Service
We walk the floor with your team and confirm when each area is ready for foot traffic, forklifts and equipment.
Schedule a Site Assessment
Tell us about your facility. We'll visit, test the slab and provide a written proposal with a realistic timeline.
Build a Floor That Keeps Up With Your Operation
Warehouses, plants, distribution centres and food facilities across San Antonio trust us with floors that perform under pressure. Schedule a site assessment and get a written proposal for your facility.
Industrial Epoxy Flooring FAQs
Can epoxy flooring handle forklift traffic?
Yes, when the right system is used. Forklift areas need a high-build epoxy with an abrasion-resistant topcoat rather than a thin coating. Floors with very heavy loads or hard wheels may need a thicker, aggregate-reinforced system, which we specify after assessing your traffic.
How thick should an industrial epoxy floor be?
It depends on the loads, impact and chemicals in each area. Industrial systems are applied much thicker than standard coatings, and different zones of the same facility may need different thicknesses. Your written proposal will specify the system and thickness for each area.
When can forklifts and equipment return to the floor?
Foot traffic usually returns before heavy equipment. Forklifts and machinery need the system to reach full cure, which typically takes several days depending on the product and temperature. Where time is critical, we can recommend faster-curing options and phase the work by zone.
Will moisture in our concrete slab affect the coating?
Moisture coming up through a slab is a common cause of coating failure. We test for moisture during the site assessment and, where needed, recommend a moisture-mitigating primer before the floor system is installed.
Can you work during a planned shutdown or in phases?
Yes. We can plan the project around a scheduled shutdown, or complete the floor zone by zone so parts of your facility stay operational. The phasing plan is agreed with your team before work begins.
Should a warehouse use epoxy or polished concrete?
Both work well in warehouses. Polished concrete is ideal for dry storage and distribution space where low maintenance matters most. Epoxy is the better choice where you need chemical resistance, sanitation, colour-coded zones or a sealed, easy-to-clean surface.
Do you repair damaged industrial floors and joints?
Yes. Cracks, spalled areas and damaged joints are repaired as part of surface preparation. We also provide concrete joint repair to protect joint edges from forklift and pallet-jack damage.